ABB EVLunic B+

ABB EVLunic B+

The EVLunic AC wallbox provides a high quality yet cost effective electric car charging point. Easy to fit and with a compact design, the wallbox can be installed at homes or offices, allowing drivers to simply plug their car in and get on with their day.

This product is currently out of stock and unavailable.

Description

The EVLunic AC wallbox provides a high quality yet cost effective electric car charging point. Easy to fit and with a compact design, the wallbox can be installed at homes or offices, allowing drivers to simply plug their car in and get on with their day.

Main features:

  • 11kW and 22kW AC charging available
  • Authentication
  • Robust all-weather enclosure for indoor and outdoor use

Main benefits:

  • Easy installation to save time
  • Compact design to save space
  • High quality for more reliability
  • DC leakage detection included

Technical data

General

Overvoltage category: III according to EN 60664
Protection class: I
Protection type: IP54
Protection against mechanical impact: IK08 (except for cylinder lock)
Rated short-time withstand: < 10 kA effective value according to EN
61439-1
Internal residual direct current detection
Residual Direct Current Detecting Device: ≥ 6 mA

Power supply

Power consumption
Rated supply voltage (Europe)
■ B:
■ B+ / Pro S / Pro M:
■ 230 V
■ 3 x 230 V / 400 V
Power consumption
■ B: ■
Idle: 2 W
■ Plugged: 3 W
■ Charging: 5.5 W
■ B+ / Pro S: ■
Idle: 3 W
■ Plugged: 4.5 W
■ Charging: 6.5 W
■ Pro M: ■
Idle: 4 W
■ Plugged: 5 W
■ Charging: 7 W
Rated current (configurable): 10 A / 13 A / 16 A / 20 A / 25 A / 32 A
1-phase or 3-phase
Line frequency: 50 Hz
Mains forms: TT / TN / IT
Supply terminals
Type: Spring-type terminal
Cable feed: Top (surface), rear (flush)
Connection cross-section of the supply Minimum cross-section (depending on the cable
and the type of installation)
■ 16 A rated current: ■ 5 x 2.5 mm2
■ 32 A rated current: ■ 5 x 6.0 mm2
Cross-section:
■ Rigid / flexible: ■ 0.2 – 16 mm2
■ Flexible with wire end sleeve with / without
plastic sleeve:
■ 0.25 – 10 mm2
AWG: 24 – 6
Stripping length: 12 mm
Flathead screwdriver: 5.5 mm
Temperature rating: 105 °C
12.3 Cable / Socket
Cable versions*): Type1 cable: up to 32A / 230V AC according to
EN 62196-1 and SAE-J1772
Type 2 cable: up to 32A / 400V AC according to
EN 62196-1 and VDE-AR-E 2623-2-2
Socket variants: Type 2 standard socket: 32A / 400V AC according
to EN 62196-1 and VDE-AR-E 2623-2-2
*) For rating, see rating plate on the cable

Ambient conditions

Operating temperature
■ 16 A: ■
-25°C to + 50°C (without direct sunlight)
■ 32 A: ■
-25°C to + 40°C (without direct sunlight)
Storage temperature: -25°C to + 80°C
Relative air humidity: 5 % to 95 % (non condensing)
Altitude: max. 2000 m above sea level
Rate of temperature change: Max- 0.5°C / min

Interfaces

Ethernet interface
Plug type
■ X3 (Ethernet2) ■ RJ45 (debug only)
■ X4 (Ethernet1) ■ LSA+® terminals
Data transfer rate: 10/100/1,000 Mbit/s
USB interface
Type: A, USB 2.0 (Hi-Speed)
Max. output power: 500 mA
Enable input X1
Type: Spring-type terminal
Cross section: 0.08 – 4 mm2
AWG: 28 – 12
Stripping length: 8 mm
Flathead screwdriver: 3 mm
Switch contact output X2
Type: Spring-type terminal
Safety extra low voltage: <50 V AC, 50 / 60Hz
External current limit: max. 0.5 A
Cross section: 0.08 – 4 mm2
AWG: 28 – 12
Stripping length: 8 mm
Flathead screwdriver: 3 mm
SIM card (optional)
Size: Mini-Sim (2FF)
Type: Industrial / M2M recommended
RFID card (optional)
Type: MIFARE card / tag according to ISO 14443 or ISO 156
Key-operated switch (optional)
Type: Profile half cylinder according to EN 1303 or
DIN 18252
Length: 30 mm
WLAN / Wifi interface (only EVLunic Pro M)
Type: IEEE 802.11 b, g, n
2.4 GHz
Supported modes: AP Ad-hoc-Mode, Client Mode
GSM interface (only EVLunic Pro M, optional)
Type: 3 G
Transmission rate: max. 230 kBaud/s on the data channel
Frequency bands: GSM900, DCS1800, UMTS B1, UMTS B8

MID specific data

Meter type: Electricity meter for active power
Measurement type: Converter measurement
Non-return device: Electronic
Accuracy class: Class B (according to EN 50470-1, -3)
Minimum current: 0.15 A
Reference current: 3 A
Maximum current: 16 A / 20 A / 32 A
Pulse output in test mode: 10,000 pulses/kWh
Mechanical environmental conditions: Class M1 (according to MID 2014/32/EU)
Electromagnetic environmental conditions: Class E2 (according to MID 2014/32/EU)
Technical data
Installation manual V 1.00 Document: V 1.02 / Document No.: 105727 │ Date 21.08.2018 │59

Dimensions

Height: 495 mm
Width: 240 mm
Depth: 163 mm
Weight: approx. 6 – 10 kg (depending on device version)

Additional information

Capacity

11kW, 22kW

Interface

Tethered Cable T2 4M, Tethered Cable T2 6M, Socket T2, Socket With Shutter T2

Security

None, RFID, Key